Item: P700-3 The 7 tapered chuck is designed specifically for use with buffing wheels, brushes and lead centered wheels. Precision manufactured of alloy steel, this chuck is built for placement onto lathes and polishing motors containing standard dental tapered shafts.
Specify 7L (Left) or 7R (Right) when ordering.
Shipping Wgt.: 6 oz [107 g] Unit Dimensions: 5/8” Shank Diameter x 3 5/8” L [2cm x 9cm]
Item: #7B – The 7 tapered chuck is designed specifically for use with buffing wheels, brushes and lead centered wheels. The 7B Tapered chuck is made of brass to provide easier on/off placement onto tapered dental shafts, causing less shaft wear.
Specify 7BL (Left) or 7BR (Right) when ordering.
Shipping Wgt.: 6 oz [107 g] Unit Dimensions: 5/8” Shank Diameter x 3 5/8” L [2cm x 9 cm]
#5 STONE – for 1/4” [6.3mm] I.D. (hole size) Wheel – RIGHT $12.98
#6 STONE – for 1/4” [6.3mm] I.D. (hole size) Wheel – LEFT $12.98
Shipping Wgt.: 6 oz [107 g]
Item: #18 – The 18 Atlas chuck is a precise “Jacobs type” chuck for use with chuck accessories having a diameter of .001” [0.03mm] to .250” [6.4mm].The 18 Atlas chuck attaches to the right shaft of a dental lathe with standard dental tapered shafts. Machined to precision limits, the 18 Atlas provides the technician with concentricity unmatched by any other adjustable chuck with no run-out and no vibration.\
Item: #12 – Designed with a 1/4” [0.6cm] shank for use in Jacobs type chucks.This stone chuck accommodates abrasive stones with 1/4” [0.6cm] I.D. arbor only. Manufactured of alloy steel and plated.
Specify: 12L (Left) or 12R (Right) when ordering.
Shipping Wgt.: 4 oz [113 g]
Unit Dimensions: 2 3/16” long x 3/4”
Shank Diameter [6cm x 2cm] with a 1/4”Shank Diameter.
Item: #13 – Designed with 1/4” [0.6cm] shank for use in Jacobs type chucks. Accepts 3/4”x 3/4” [1.9cm x 1.9cm] abrasive arbor bands. Manufactured of alloy steel and plated.
Specify 13L (Left) or 13R (Right) when ordering.
Shipping Wgt.: 4 oz [113 g]
Unit Dimensions: 2 5/8” L x 3/4”
Shank Diameter [7cm x 2cm] with a 1/4” Shank Diameter.
Designed with 1/4” [0.6cm] shank for use in Jacobs type chucks.This tapered chuck is built to accept small buffs, brushes and lead-centered wheels. Made of alloy steel and plated.
Specify 13-1L (left) or 13-1R (right) when ordering.
Shipping Wgt.: 4 oz [113 g]
Unit Dimensions: 2 5/8” L x 1/2”
Shank Diameter [7cm x 1.3cm] with a 1/4” Shank Diameter.
Item: #20 – A tapered chuck manufactured of steel alloy for use on 1/2″ [1.3cm] straight or 5/8″ [0.6cm] straight shafts.
Available for the Left or Right side of a polishing motor. This chuck provides the user with a heavy duty chuck for use with buffs, brushes and lead centered accessories. Mounts with screws.
Please specify shaft diameter and Left or Right Position.
Item: #16 – The Handler Chuk/Changer was designed to provide full automatic, precision changing of 1/4” [6.3mm] and 3/32” [2.4mm] diameter burs, mandrels and chuck accessories with the slight movement of a handle while the motor is turning. The Chuk/Changer provides the technician with exacting concentricity and quick, easy changing of various chucks which greatly speeds grinding, polishing and finishing procedures.
The 16 Chuk/Changer is installed on the right side of the lathe and is adaptable to most types of dental motors, including Red Wing and Baldor (special adapter required).
The 16 Chuk/Changer is shipped complete with chuck accessories as follows:
P16-15 Arbor Band Chuck
P16-16 Spiral Tapered Chuck
P16-19 Stone Chucks
P16-20 Mandrel (1/64)
P16-21H Mandrel (1/32)
P16-8 Collet Wrench
P16-10RW Clutch
P16-ADRW Adapter
NOTE: Available for left side Model 16L. $621.87
Shipping Wgt.: 3 lbs [2.3 Kg]
Unit Dimensions: 8 3/4” L x 4” W x 6 1/4” H [22cm x 10cm x 16cm]
